Epson D78, D92, D120 *
Epson DX4000, Epson DX4050 *
Epson DX4400, Epson DX4450 *
Epson DX5000, DX5050 *
Epson DX6000, DX6050 *
Epson DX7000 *
Epson DX7450, DX8450 *
Epson R265 *
Epson R360 *
Epson RX560 *
Resets genuine Epson T0711/12/13/14, T0801/2/3/4/5/6.
Resets some T0711/12/13/14
compatible cartridges, but unfortunately not all.
Reset to gain extra prints or reset to refill.
Just place over the chip and wait for the green light!
Comes with battery installed and is ready to use.
Lasts for around 100 resets.
IMPORTANT INFORMATION
We cannot guarantee that it will reset all brands of compatible's or our earlier "Version 1" cartridges.
Instructions
The JR-JRZAPIT09 will reset the chips on genuine Epson T0711, T0712, T0713, T0714, T0801, T0802, T0803, T0804, T0805 & T0806 cartridges but the you will need to reset your cartridges before the ink level goes below around
50%. This is because, on a genuine Epson cartridge, there is a sensor behind the chip that is always immersed in the ink. If the cartridge is empty or low then air will have reached the sensor and it will render the cartridge permanently unrecognisable after resetting. Resetting the cartridge at 40% ink level or above will keep the sensor immersed in ink and therefore stop the cartridge from being rejected.
As far as we know, the sensor behind the chip on a genuine cartridge performs no other function than to make it difficult for the cartridge to be reset or refilled.
